GEN 1
High-Density Panel Structure
The first generation holds the pool wall on an internal high-density panel, so the pool stands without inflation. It folds flat again after use.
Foldable swimming pool manufacturer · Jiangsu, China
We manufacture foldable swimming pools: non-inflatable pools that need no pump, no inflatable air chamber and no steel-frame assembly. The pool unfolds in about 10 seconds and holds its shape on an internal high-density fiberboard core. Send us a drawing, a sample or the product you want to beat, and we take it from engineering to a packed container at our own plants.
High-Density Panel Structure
External Galvanized-Steel Support
Integrated Steel Support
8
Manufacturing Facilities
70+
Production Lines
2,000+
Employees
Since 2008
Manufacturing Experience
Own figures, in the same numbers our buyers verify during an audit.
Buyer essentials
Final specifications, quantities and lead times are confirmed per project.
The three generations
The construction has been developed in three generations: a high-density panel structure, then external galvanized-steel support, and now an integrated-frame pool that needs no separate frame assembly.
GEN 1
The first generation holds the pool wall on an internal high-density panel, so the pool stands without inflation. It folds flat again after use.
GEN 2
The second generation adds an external galvanized-steel support to the same no-inflation wall. It is also built with a removable sunshade canopy (CO-PL-10201).
GEN 3
The third generation integrates the steel support into the pool body, so there is no inflation and no separate frame assembly. The official product name is Integrated-Frame Pool, model CO-PL-10202.
The same plants also build above-ground frame pools, easy-set pools, canopy pools and slide pools for the same programs.
Structure comparison
Inflatable, foldable non-inflatable and conventional frame pools each answer a different program: set-up time, storage, container space and the price the buyer's market expects. The table sets the three side by side, including where the other two are the better answer.
| COMCO foldable non-inflatable pool | Inflatable pool | Steel-frame or easy-set pool | |
|---|---|---|---|
| Set-up | Unfold and fill — about 10 seconds to unfold | Inflate with a pump, then fill | Assemble the frame or lock the tubes, then fill |
| Air chamber | None: an internal high-density core holds the wall | The wall depends on air being held | No air in the wall; a top ring may still be inflated |
| Between seasons | Drains and folds flat | Deflate, dry thoroughly and store carefully | Take the frame apart and store the parts |
| Shape under load | A rigid, self-standing wall | Tension falls as air is slowly lost | Rigid while the frame is correctly assembled |
| Packing | Folds into a compact retail carton | Compact, but large sizes use a lot of container space | Usually the largest carton of the three |
| Best for | Brands and retail programs that want a difference customers notice in the shop | Low entry price and the familiar category | Large round sizes at a mid price point |
Custom manufacturing
Printing, HF welding, sewing and sampling sit in the same group, which is why a change of artwork, a new panel or a different carton is a program change rather than a new supplier chain.
The photographs are COMCO's own production lines.
Inside the factory
We are not a trading office: the group owns its plants in Jiangsu and keeps film production, printing, welding, sewing and inspection under one management.
01
PVC is compounded in-house and calendered to film on our own lines, so the material behind the wall is made rather than bought in.
02
The printed panel comes off the group's own printing lines.
03
The welded seam and the sewn accessory are made in the same group.
04
Volume runs across the group's plants and 70+ production lines, in season.
05
Eight self-owned plants in Jiangsu under one management.
The photographs are COMCO's own plants, production lines and test areas.
Proof
Quality control, audit experience, retail program support and product development evidence behind COMCO's non-inflatable pool programs.
The checks follow the construction: the incoming material, the third-party material testing, and the pool body itself. The point is to find a problem in the factory rather than in your warehouse.
COMCO has experience working with major retailer, social-compliance and licensed-brand audit programs. Supporting reports are available for buyer review.
Walmart
Audit Program
Target
Factory Assessment
BSCI
Social Compliance
Disney
Program Experience
Universal
Program Experience
Audit coverage is site-specific. Which plant a given audit covers is confirmed against the individual report.
The group supplies retail supply-chain and brand programs, and meets buyers at the trade shows named below.
Trade Show Presence New York Toy Fair · Hong Kong Toys & Games Fair · Canton Fair · Thailand Mega Show · Shenzhen Decoration Fair · Spielwarenmesse Germany
Share of the group's orders by market, as recorded in our own figures.
Two years of development and roughly twenty to thirty prototype revisions produced a pool that unfolds instead of inflating. The design is registered in four markets.
How we make it
A non-inflatable pool moves through four stages, and a sample is approved before volume starts.
01
Product direction and requirements: your drawing, sample or target price is turned into a construction and a costing.
02
Structure, artwork and sample development: a physical sample is built so the structure can be seen and handled.
03
Sample review and order confirmation: the sample is signed off against the specification before tooling or volume starts.
04
Mass production, inspection and shipment: the pool body is inspected on the light table, then the cartons are loaded and the documents are issued.
A swimming pool whose wall holds its shape without air: no pump, no inflatable air chamber and no steel-frame assembly. The wall is held by an internal high-density fiberboard core, the pool unfolds in about 10 seconds, and it folds flat again after use.
It varies by model and is confirmed per project. Tell us the model, the size and the market you sell into, and we will confirm the minimum for your program.
Typically 45–60 days, counted from sample confirmation. Peak season may require longer.
Yes. Sizes, wall configurations, artwork and private-label programs are developed per project, and a sample is approved before tooling or volume starts. Your designs, drawings and tooling are treated as confidential, and a bilateral NDA can be signed on request.
Next step
A name, an email and a message are enough to start. Reference product, quantity, target market and target price all help, but the brief can be one line.